Request errors

General errors

Table 1 C000~C100

Error code	Symptom	Cause	Resolution
C000	KNError_Code_C000, Unknown Error	-	-
C010	KNError_Code_C010, Application Context not Initialized, must be called Install()	Displayed when initWithMapKey is called without passing the application context through the install function while initializing the SDK.	Declare the Install function at the top of onCreate().
C100	KNError_Code_C100, No route data.	-	Add route data.

Authentication errors

Table 2 C101~C199

Error code	Symptom	Cause	Resolution
C101	KNError_Code_C101, API Key Missed	Displayed when the SDK app key was not entered, or an unregistered app key was used.	Use an app key with the correct path.
C103	KNError_Code_C103, SDK Certification Failed	Displayed when SDK authentication failed and the authentication request did not reach the server properly.	Check whether the SDK is using the correct app key.
C104	KNError_Code_C104, SDK Configuration initialize Failed	Displayed when SDK configuration initialization failed and the values required to run the SDK (such as map version information) were not received from the server properly.	Initialize the SDK configuration again.
C105	KNError_Code_C105, SDK GPS initialize Failed	Displayed when SDK GPS initialization fails.	Initialize the SDK GPS again.
C106	KNError_Code_C106, SDK Map initialize Failed	Displayed when SDK Map initialization fails.	Initialize the SDK Map again.
C107	KNError_Code_C107, SDK Reverse Geocoder initialize Failed	Displayed when SDK Reverse Geocoder initialization fails.	Initialize the SDK Reverse Geocoder again.
C110	KNError_Code_C110, Crashed occurred during initialization	Displayed when the Renderer is not initialized properly while initializing MapView for use in the application, or when a crash occurs while reinitializing an already created MapView.	Initialize through makeWithMapView.
C112	KNError_Code_C112, Failed to remove local map data	Displayed when, while calling fun clearDBFile to delete the data used by the map, the file does not exist or is in an access-denied state (in use elsewhere, or without write permission).	Obtain write permission in the application, then remove it.
C116	KNError_Code_C116, SDK has not been initialized	An error that occurs when a route is requested while KNSDK has not been initialized properly.	Request a route only after KNSDK authentication succeeds and initialization completes normally.

Route errors

Table 3 Errors 20000 and above

Error code	Symptom	Cause	Resolution
20010 Legacy code: R240	KNRouteError_Code_20010	The current location and the destination are too close, so a route cannot be searched.	The destination is too close for route guidance. Set the destination to a location farther away.
20011 Legacy code: R402	KNRouteError_Code_20011	A route cannot be provided due to traffic incident information near the origin.	Remove the KNRouteAvoidOption_RoadEvent setting that avoids traffic incident sections.
20012 Legacy code: R404	KNRouteError_Code_20012	A route cannot be provided due to traffic incident information near the destination.	Remove the KNRouteAvoidOption_RoadEvent setting that avoids traffic incident sections.
20013 Legacy code: V001 ~ V999	KNRouteError_Code_20013	A route cannot be provided due to traffic incident information near a waypoint.	Remove the KNRouteAvoidOption_RoadEvent setting that avoids traffic incident sections.
20410 Legacy code: R105, R124	KNRouteError_Code_20410	There is no road available for guidance near the origin.	Set the origin to a place where a road available for guidance exists.
20411 Legacy code: R106, R125	KNRouteError_Code_20411	There is no road available for guidance near the destination.	Set the destination to a place where a road available for guidance exists.
20412 Legacy code: R107, R123	KNRouteError_Code_20412	There is no road available for guidance near the waypoint.	Set the waypoint to a place where a road available for guidance exists.
20413 Legacy code: R126, R129	KNRouteError_Code_20413	No route exists that excludes motorways.	Add the KNRouteAvoidOption_MotorWay setting that avoids motorways.
20414 Legacy code: R127, R128	KNRouteError_Code_20414	No toll-free route exists.	Add the KNRouteAvoidOption_Fare setting that avoids toll road sections.
20415 Legacy code: R130	KNRouteError_Code_20415	No route exists that excludes ferries.	Add the KNRouteAvoidOption_Farries setting that avoids ferry route sections.